British Fires Wiltshire L23G Guide de dépannage

British FiresWiltshire - CheshireMODEL : L23GINSTALLATION AND USER INSTRUCTIONSAll instructions must be handed to user for safekeepingRevision A - 08/

FITTING THE DECORATIVE FRAME ASSEMBLYWiltshire Models :Remove the decorative frame assemblyfrom any protective packaging, and removeany protective fil

SERVICINGIsolate the fire from the gas supply. Ensure that the fire is fully cold before attempting service. A suggested procedure for servicing is

CATALYSTIt is recommended that the catalysts are inspected for signs of damage and dirt during routine servicingprocedures. The expected life of the c

TROUBLESHOOTING GUIDEFire sparks but pilot does not light No gas to fire, check isolators are open. Pipe work blockage, clean out. Air not fully purg

USER INSTRUCTIONSSection Content Page No1.0 Important Notes 12.0 Clearances to Combustibles 23.0 Ventilation & Room Size 24.0 Operating Instructio

CLEARANCES TO COMBUSTIBLESClearances to combustible materialsCombustible materials are defined as wood, fabrics, or other materials likely to combust

VENTILATION AND ROOM SIZE (continued)The room size should be a minimum of 23m3(e.g. 10’1” x 10’1” x 8’) to allow adequate circulation of airand ensure

WiltshireCheshire

INSTALLATION INSTRUCTIONSPreliminary Notes Before InstallationThis appliance is a high efficiency, flueless, flame effect gas fire. It providesradian

IMPORTANT NOTESThis appliance is a catalytic flueless flame effect gas fire, providing radiant and convectedwarmth. It is designed to operate on Natu

INSTALLATION REQUIREMENTSIf the appliance is to be sited near a disused natural draught flue it is recommended that the old flueshould be partially se

SITE REQUIREMENTS (continued)Clearances to non-combustiblesNon combustible surfaces are defined as brick, metal, marble, concrete etc. and also a numb

VENTILATION (continued)Any ventilation fitted must comply with BS 5871 part 2 and BS 5440 part 2. Ventilation fitted under, orwithin immediate vicini

FIXING THE APPLIANCEAfter having selected the final mounting position ofthe appliance, taking into account the site require-ments as specified in sect

TESTING AND COMMISSIONINGTurn on and test the gas supply up to the fire for any leaks, in accordance with the current edition ofBS6891.OPERATING THE A